Aircraft Hydraulic GPU Test Mule 100 HP For Sale


Aircraft Hydraulic GPU Test Mule 100 HP
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Aircraft Hydraulic GPU Test Mule 100 HP:
$10000.00

Wilson Hydraulic Ground Power Filter Aircraft Mule GSE 100HP 44GPM (35-9475) MIL-H-5056 hydraulic the aircraft hydraulic systems.
  • Filter the aircraft system hydraulic fluid.
  • Refill the aircraft system with clean fluid.
  • Check the aircraft hydraulic systems for operation and Just purchased from a Major Aircraft Manufacturer in ready-to-use condition
    - Suitable for servicing and testing of new mfg or rebuilt aircraft systems; it is designed to filter/clean, pressure test, operate power hydraulic systemsduring andafter final assembly.
    - Units have a programmable PLC’s that will control Pressure, and Volume of pump and may have other aircraft and or commercialhydraulic applications.
    - Current replacement is over $100,000.00 and 4 to 5 Month lead time.
    - Very low hour machines ranging from 467 total hours.
    - Can be programed to vary pressure and volume for different applications and components.
    - An essential GSE ( Ground Support Equipment )Description
    - Manufacturer : Wilson
    - Part Number : 35-94753
    - Reservoir Size : 100 Gallons
    - Flow Rate :0 to 44 GPM
    - Relief Set to 3250 PSI (can beprogramed from 100PSI to 5000PSI)
    - Baldor Motor Catalog Number : CM2555T
    - Motor : 100 HP, OPD 1760 RPM 3PH 230/460
    - System has preset GPM flow settings 4, 6, 8, 10, 12, 14, 18, 20, BNC, PCT & OFF-- With Digital Read Out, but can be set to different requirements.
    - Low Oil Shut Down (Indicator Light)
    - Dirty Filter Shut Down (Indicator Light)
    - Return Filter Shut Down (Indicator Light)
    - Oil pressure & Oil Temperature Gages
    - Manual Output Pressure Control 0 to 5000PSI (Normally set to 3250PSI for Aircraft use)
    - High pressure and low pressure Filtering system (Filter Parker #9323652)
    - Additional High Pressure testing points located throughout system.
    - External test pocket with drain; plumbed and wired for additional gages and instrumentation.
    - Each unit is in a portable roll around protective enclosure with a folding tong and forklift pockets for lifting.

    PPLC Control:
    - Cutler-Hammer D100 Programmable Control
    - EG&G Flow control and metering electronics linked & controlled by PLCParker Axial Piston Pump Specifications
    - Parker Pump : PV092R1A1T1NPFC31
    - Displacement : 92cm³/rev
    - Rotation : Clockwise
    - pdmax : 350 BAR
    - Pmax : 420 BAR- We have two of these available and the Total Hours are 404.2 and 467.6
    - All units are basically identical having the same internal components.
    - If you are in need of some heavy duty hydraulic hoses, please check out our store in the link below.
    ***Don\'t like the price? Make us an offer!

    ***WE ARE OFFERING A REFERRAL FEE IF YOU KNOW SOMEONE INTERESTED IN THIS MACHINE


    #5613( JK )5/10/12 NPN 10/0/13 NPN 10/2014 NRN 11/6/2014 NRN 11/18/2015

    32k to 22.5k 8-19-16 NPN to 20k MIL-H-5056 DR 4/13/17

    20k to 15.5k AA 11/11/17

    15.5k to 10k AA 7/23/18


    response:

    - We do the best we can to get it right, but with the vast diversity of items we offer, things can be overlooked. If you are not satisfied with any part of your transaction with us, please give us the chance to resolve this. If you feel you have received 5 star service, please indicate that in your response. If you feel like we could have done better, please contact us and let us know your feelings. We can’t fix it if we don’t know about the problem.


    QUESTIONS:

    - We strive to answer all messages within 24 hours. During the holidays there may be a longer response time. Please feel free to message us with any questions, comments or concerns.


    SHIPPING, SIZE AND WEIGHT:

    - You are welcome to arrange your own shipping. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. The USPS has a 70 lb weight limit with dimensional restrictions. UPS has a 150 lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your itemusing the most cost efficient way we can provide. We do allow local pickup at our facility in Fort Worth.


    NOTICE:

    - Regardless of the carrier used, the receiver is responsible for thoroughly inspecting the shipment immediately upon receipt as well as noting any specific damage on the delivery receipt before signing. If no damage is noted on the delivery receipt at the time of delivery the receiver affirms that the item has been fully inspected, is undamaged and is as described in the listing. The Tool General will not accept the return for refund of any item/items that have undocumented damage. If a damage claim is filed after the delivery with no damage noted on the original receipt the liability will be reduced to 25% of the cargo value.


    FREIGHT SHIPPING:

    - Freight shipping varies highly in regards to cost. The shipping calculators on only cover the US and Canada and are generally 40% - 60% higher than our shipping rates. Please contact us before paying if you are interested in obtaining a more competitive shipping quote. Also, if you need international or rush shipping it would be prudent to convey that before placing a offer. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. You are welcome to arrange your own shipping. We do allow local pickup at our facility in Fort Worth.


    FREIGHT SHIPPING REQUIREMENTS:

    - In order to ship freight, we will require your complete contact information including: company name, individual receiver, complete address, and a contact phone number. We will also need to know if you are a business with a dock and/or forklift to unload. Without this information your shipment may be delayed. Any missing details that increase the shipping cost will be billed to you directly from the freight carrier. There may be additional charges for residential freight delivery.

    Click on the logo abovetoseeour store!




    Buy Now


  • Other Related Items:



    Related Items:

    1971 Airgate Hydraulic Aircraft Maintenance Platform Ad picture

    1971 Airgate Hydraulic Aircraft Maintenance Platform Ad

    $19.49



    NOS Box of 7 PROTO Open End 1-5/16” × 1-3/8” Hydraulic Aircraft Wrench AN8505-17 picture

    NOS Box of 7 PROTO Open End 1-5/16” × 1-3/8” Hydraulic Aircraft Wrench AN8505-17

    $250.00



    Aircraft Hydraulics Systems Chicago EW McDonough 1940 picture

    Aircraft Hydraulics Systems Chicago EW McDonough 1940

    $39.95