FS2004 FOKKER 100 panel This panel needs the activation of autothrottle and armed. Please check that it is activated correctly in the autopilot section of aircraft.cfg by Philippe WALLAERT

FS2004 FOKKER 100 panel

 
Category:

FOKKER 100 panel by Philippe WALLAERT

phwallaert@hotmail.com


Copyright:

All gauges and original bitmaps are distributed as freeware. The use of them (totally or partially) for commercial
usage or as part of an aircraft distribution is submitted to authorization.


Unzip all files into the aircraft panel folder

EG: C:Program FilesMicrosoft GamesMicrosoft Flight Simulator XSimObjectsAirplanesFokker_100panel

Main_Panel.bmp
Overhead.bmp
Throttle.bmp
F100.CAB
Panel.cfg
Readme.txt

Important notes:

1) AUTOTHROTTLE

This panel needs the activation of autothrottle and armed.
Please check that it is activated correctly in the autopilot section of aircraft.cfg

EG:
[autopilot]
autopilot_available = 1
flight_director_available = 1
default_vertical_speed = 1500.0
autothrottle_available = 1 <------------
autothrottle_arming_required = 1 <------------
autothrottle_max_rpm = 95

2)Radios

The radio section must be configurated as follows

[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1 = 1
Com.1 = 1, 1
Com.2 = 1, 1
Nav.1 = 1, 1, 1
Nav.2 = 1, 1, 0
Adf.1 = 1
Transponder.1 = 1
Marker.1 = 1

3) Fuel

This aircraft has normally 3 tanks: left main, center and right main
The fuel section must be configurated this way.

[FUEL]
Center1 = 0.000, 0.000, -3.784, 830.000, 0.000
LeftMain = -3.198, -16.500, -2.854, 1279.000, 0.000
RightMain = -3.198, 16.500, -2.854, 1279.000, 0.000
fuel_type = 2 //Fuel type: 1 = Avgas, 2 = JetA
number_of_tank_selectors = 1
electric_pump=0

4) Autobrake
The autobrake must be activated

[brakes]
toe_brakes_scale=1.241798
parking_brake=1
auto_brakes=4

5) Autopilot course selector

There is no button to select course in the autopilot. To modify course, just use mouse wheel on the MFD gauge.
The course is indicated on the top of this gauge.

6) For FS9 users

The gauges must be unzipped if you want to use this panel
- Create a sub folder named "F100" in the "Gauges" folder
- Unzip all files from F100.CAB into this folder
- Delete F100.CAB from the panel folder

Enjoy!